How To Make Your Own Radio Station

• must HAVE Winamp (Any Version)

Download Windows 8 activator 100% Working........

First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)


Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. yourdomain)

Now, Your gonna have to download the Shoutcast Files.

www.shoutcast.com

Easy Way to Hack WiFi Password 100% Working..

to get the files.

Ok After downloading these, installing Both of them in any order i dnt care. Go to START PROGRAM FILES;SHOUTcast DNAS EDIT SHOUTCAST DNS CONFIG.

Ok your gonna have to Configure it:

Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)

The Portbase: change it to whatever port you want it

Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

Open winamp, RIGHT CLICK OPTIONS PREFRENCES DSP EFFECT and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through

www.no-ip.com

PORT NUMBER, whatever u did in the EDIT.txt, and your password. 

Then go to Encoder, and choose your quality of your music. Go back to OUTPUT CONFIG YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http://(your address that you added in the prefrence)

How to Get Windows XP key From Live CD itself

Hello Friends! I hope you all are very well. Today i am going to tell a useful trick to get Windows XP key from the boot able CD. some times Most of our reader having problem with the key of Windows and write the whole on the CD but i have solution for it. Actually the Key is already write or save in the setup and you can directly access it. Follow these simple steps carefully.

Steps:

• Just explore the CD itself by going to My Computer than right clicking the CD and click Explore.
•  Now just find and open the folder named i386
•  Find the .TXT file in it named UNATTEND.TXT well it will look like simple Unattend no problem just open it with Notepad. 
•  Scroll it till the last line appears Voila !!! you have the Product Key written right in front of you. Done!

How to change MAC address in windows

Hello Friends! First of all i will tell  about MAC address . Actually Every Network Interface card having a unique address which is called physical or MAC(Media Access Control) address. This MAC address is use during the packet transmission when connected to any wired/wireless network. But in case you need to change the MAC address of your Machine in certain cases where a range of specific MAC addresses may not be permitted in some networks, then there is a simpler and easier alternative to carry out this process.

Win7 mac address changer is a free tool by which you can change your MAC address in windows very easy. This software does not require any installation and having a lots features.

Features of Win7 MAC Address Changer

• Very easy to use with very simple interface.
• No installation Needed.
• Very small in size (76kb when zipped),which makes it easy to carry around in a pendrive.
• Generate Random MAC Address using Random MAC Address Generator.
• Both Wired and Wireless Network Cards from all vendors are Supported.
• Fully compatible with Windows 7 all editions.
• Also supports for Windows XP And Windows Vista.
• MAC Address can be reset to default by using the reset button.
• All Settings of the application can be reset to default.
• A user can undo his actions by referring to log files.
• Quick system information can be obtained by System Information Module.

New in version 1.5:

• New and Improved Interface.
• Many bugs are fixed.

Download Win7 MAC address changer

Install Windows via Pen Drive: by Manual method

Hi Friends! Today i am going to post a tutorial  how   to make pen drive boot-able and install windows operating system via pen drive.

Steps:

1. Download the document file here : Downlaod

or 

Follows these stpes

 

This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide.

I just did this method on one of my friends machine and installed the new Windows 7 BETA. The main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:

D:CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE/NT60 H:

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB.

  

• Follow the steps one by one.

Make boot-able pen drive form ISO file : Intall window by easy way

Hi friends! In my previous post i told you to make pen drive boot-able.. That was a manually  procedure which take time take and extra work, so here i am going to post a very simple way to make pen drive boot-able.

For this,you should have an ISO file of the Windows which you want to install.If you don`t know about ISO file write below it will tell you in my next post.



Steps:

1. Download the software here : Downlaod 
2. Open this and give the path of ISO file.
3. connect the pen drive and fist format it with NTFS file system
4. now select the path of pen drive in software
5. then click on convert button
6. Done!
7. Now.you install windows via pen drive.

How to download torrent files with IDM

Hello friends! Today i will tell you how to download torrent file with Internet download manager(IDM).Well you may have some really keen interest getting to know how to really download torrents with IDM or any other download manager I just specified IDM because it’s the Best Download Manager I ever came across.

Steps to Download Torrent with IDM

 1. Just go to Torrific.com   or   Zbigz.com

2.  Register with a valid Email and you will have a free access that website.

 3.  Just grab the Torrent you which to download with IDM or any other download manager ( well this step needs to have IDM or any other download manager installed on your computer )

 4. Now just go to any Torrent website and then where its written click to download torrent just right click and click copy link location.

5. Now you have the Link to that torrent now you have to paste that link in the torrific website

6.  After pasting that Link just click GET

7. After clicking GET ,you will be greeted with another page saying initiate bittorent transmission.

8.  Click that button and torrent will start Caching depending on the time it takes when you will have your torrent ready it will be Blue in color and just after clicking that link your download will automatically open in your Download Manager and you will something called faster downloads.

 9. They have another very exciting feature called Email when caching is complete if you think download is taking lot of time than juts close that website it will automatically mail you the download link to your email from where you can easily check it again and proceed to download.

To download IDM full version go here : Download IDM 
Note: Click on Image to see full view.

How to increase torrent download speed

Hello Friends! I have already tell you how to download torrent file with IDM . This is another way to increase torrent speed. I think all of you use torrent for download any large file like movie, software, games etc. but you must feel that speed of your Internet are very slow in any torrent down-loader  so i have come with this awesome trick How to increase torrent downloading speed.Follows these simple steps carefully

uTorrent Turbo Accelerator


The software we are talking about is uTorrent Turbo Accelerator. This tool will be able to improve upon your current download speed based on effective management of bandwidth.Hence you will be able to see a slight improvement in your torrent speed as compared to your normal download speed.Its available for all the versions of windows operating system and doesn't contain any ad-wares. Cleans up invalid files as well asfinished files automatically.Feel free to make use of this tool. Just Download this software and Install.

 Download uTorrent Turbo Accelerator